View Single Post
  #14 (permalink)  
Old 10-11-2017
TownsendsFJR1300's Avatar
TownsendsFJR1300 TownsendsFJR1300 is offline
Senior Member
Join Date: Aug 2011
Location: Cape Coral, Florida
Posts: 5,617

Also, I'd try to set up some sort of jig to make sure your perpendicular to the block for drilling and tapping.

Wether it be a block of wood, steel, aluminum, INITIALLY DRILLED in a DRILL press(so it's square), then attached / clamped, etc to the block would help keep things straight..

If it's crooked enough, you'll likely have a small leak unless using sealer on the threads...
Reply With Quote