View Single Post
  #3 (permalink)  
Old 08-29-2017
fishnfvr fishnfvr is offline
Junior Member
 
Join Date: Aug 2017
Location: North Jersey
Posts: 7
Default

I was just looking at all my connectors and followed a blue wire with a yellow stripe to the fuse box. After removing fuse box cover, a grey plug with a black jumper wire fell out and am not sure if it should be plugged in. For some reason when I try to load pic, it says system error so I am unable to post pic. On this engine this engine, there are two green fuses, then two yellow, then a female connector that is held on by a single screw. This is where it fits. I m just afraid to plug it in, if it's not supposed to be.


My issue is, my engine is surging ( rpms jump up and down ) at low and mid range ( 1000 Rpms - 4000 rpms ). From 4000 on, no issues at all.

Last edited by fishnfvr; 08-29-2017 at 08:05 PM.
Reply With Quote